Description of chain link fence
It is made from galvanized or PVC coated iron wire, to fix with posts, brace and fittings to build a chain link fence system in the park, tennis court, airport and other places. Also can be used for animal breeding. It is mainly divided into galvanized, PVC, PE-coated three finishing chain link fence with easy construction and maintenance, bright colors, which are the preferred products to beautify the urban environment.
Specification of chain link fence
1. Material: Electric galvanized iron wire, hot-dipped galvanized iron wire, PVC coated wire, stainless iron wire, Aluminum alloy flat wire, etc
2. Mesh wire: 1mm-5mm
3. Mesh size: 1/2"x1/2"-2"x2"
Attractive, versatile and creative
4. Classifications: Chain link fence, diamond mesh, chain mesh, chain link network, active network
5. Advantages: Nice, the overall effect is good, durable resistance to strength
6. The diamond mesh wire construction is:
1)Strong;
2)Safe and Flexible; 3)does not break; 4)does not sag or roll up at the bottom.
7. Weaving: Woven diamond pattern provides strong, durable and flexible construction. The closely spaced diamond mesh construction gives your fence linear strength and springy texture to protect horses from injury and prevent predators from entering paddocks and pastures.
8. Benefits: Low carbon steel diamond mesh has a heavy galvanized coating to ensure a long time.
9. Usage: Used as fencing for sports field, river banks, construction also animal fencing.
Here are chain link gate installation steps and tips.
First: Under the instructions, make a gate framework and the first part attached on the sliding belt. Then sliding parts are assembled door frame with your hands.
Second: Sliding a rod into the fence and through a coil.
Third: Attach the tension band and slide the second lever into the mesh. Make sure you slide it close enough to the opposite side rail to hold the mesh taut once you attach it to the tension bands.
Fourth: Unhook the strand of mesh that's near the outside second tension bar and pull it out, removing the excess mesh with pliers.
Fifth: Pull the mesh along with tension band tightly while slipping the tension bar into the tension bands on the frame of the gate with pliers, if the net is not tight enough the lever to into go to the next set of loops. Unravel the excess mesh and hook the bar back into the tension bands.
Final: Attach the tie line to the benchmarking of the top and bottom once the mesh is fixed in one place. A Cable line in the mesh around the hook with pliers, pulled the network cable has been slightly higher than the door frame to the network. Ensure let the tie cord around freely in the mesh around with pliers.
Tips: His metal hardware must be ready to complete. In order to switch the gates must be to the height of the ground.
| Opening |
1" |
1.5" |
2" |
2.25" |
2.4" |
2.5" |
3" |
4" |
| 25mm |
40mm |
50mm |
55mm |
60mm |
65mm |
76mm |
100mm |
| Wire diameter |
BWG18-BWG13 |
BWG16-BWG8 |
BWG14-BWG7 |
| 1.2mm-2.4mm |
1.6mm-4.2mm |
1.0mm-4.5mm |
| Length of the roll |
1.0m-50m |
| Width of the roll |
0.5m-5.0m |
| Materials and specifications can be made according to customers specific requirements |
| Fence Height |
Fence Length(2m) |
Fence Length(2.5m) |
| cm |
Wire Gauge |
Wire Diameter |
Opening |
Weight kg/piece |
Fixing Pole |
Opening cm |
Weight kg/piece |
Fixing Pole |
| |
mm |
cm |
Weight kg/set |
Weight kg/set |
| 60 |
10#/8# |
3.2 4 |
5X12 |
6.5 |
1.9 |
5X12 |
8.6 |
1.9 |
| 80 |
10#/8# |
3.2 4 |
5X12 |
7.5 |
2.3 |
5X12 |
9.9 |
2.3 |
| 100 |
10#/8# |
3.2 4 |
5X12 |
8.5 |
2.7 |
5X12 |
11.2 |
2.7 |
| 120 |
10#/8# |
3.2 4 |
5X12 |
9 |
3.1 |
5X12 |
11.9 |
3.1 |
| 150 |
10#/8# |
3.2 4 |
5X12 |
11 |
3.7 |
5X12 |
14.5 |
3.7 |
| 180 |
10#/8# |
3.2 4 |
5X12 |
12.5 |
4.3 |
5X12 |
16.5 |
4.3 |
| 200 |
10#/8# |
3.2 4 |
5X12 |
13.5 |
4.7 |
5X12 |
17.8 |
4.7 |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}