high quality slope production net / rolled cable net Protection System rockfall netting
Slope Protection Wire Mesh (diamond-shaped steel wire mesh, ring mesh, high-strength steel wire grid) as a major component of protection system is against the rock slope collapsed, dropped, such as flyrock blasting. With the technology development and application, improving the usage of construction technology, standard modular operation, Slope Stabilization Mesh System have been applied in the geological disasters on the large scale.
Slope Protection Wire Mesh is designed by the latest international standard of rock slope protection system. Compared with traditional construction methods, the system has overcomed many rigid construction defects, and is shorten the duration and cost of construction. The whole system is composed of high-strength steel wire, bolt and other installation components
Rockfall Slope Protection Mesh refers to various types of rockfall barriers are installed and fastened to the
mountains or slopes. Compared with passive rockfall barrier system, which is installed beside the roads,
the active rockfall barrier system is covering the mountains and prevent the stones and soils from falling
down. It is widely used in the slope protection, mountain protection, vegetation protection and road
protection. It can reduce the damage caused by the natural disaster.
Common types of Rockfall Protection Mesh are chain link mesh, Rope mesh, spider spiral rope mesh .hexagonal mesh
For rock and slope stabilization we can offer the following solutions:
1.Wire Rope Net
Steel wire rope net is the most common type of rockfall barrier, including galvanized wire rope net and PVC coated wire rope net.
The wire ropes are intersected and fixed by clips and they have higher tensile strength than the steel wires. The steel wire rope can be used individually to block large stones. However, it's often used with chain link fence or hexagonal wire mesh together to
block both large and small rocks.
Material: High carbon steel, stainless steel.
Surface treatment: Galvanized, PVC coated.
Wire rope diameter: 8-20mm.
Wire rope mesh size: 20*20-360*360mm
Size: 4 m × 4 m, 4.5 m × 4.5 m.
Supporting rope diameter: 12 mm, 16 mm.
Sewing rope diameter: 8 mm.
| material |
stainless steel wire mesh,steel rope |
| feature |
By wire rope bolt and/or support rope fixed way, the latter through the steel anchor (prestressing) and cable anchor rod (rope when used with edge support), special anchor plate and when necessary, such as the edge of support fixed way, |
usage |
As the system is mainly composed of flexible network coverage in the side slope of potential geological disaster, so as to realize the protection purpose |
mesh type |
woven |
| advantage |
1.High flexibility, high protection strength, easy to spread out. To adapt to any slope topography, installation procedures standardized and systematized.
2.Using die cutting system installation, short time limit, low construction cost. |
2.Spider Spiral Rope Mesh
Spider spiral rope mesh, made of three strands of high tensile spring wires, is an important type of active protection barrier. It
has high tensile strength to bear the huge impact of natural disasters, such as landslip or debris flow. Besides, it has perfect
adaptability, which can be used on the irregular surfaces, such as mountain or slope.
Material: High tensile spring wire.
Wire diameter: 3 mm.
Strand: 3 strands.
Mesh size: 250-300 mm inner circle diameter.
Tensile strength: 1770 N/m2.
3. Tecc Mesh
Tecc mesh is made of high carbon steel wire. Tecc mesh system is a kind of active rockfall barrier system, including tecc mesh, wire rope anchor, spike plate, boundary rope, sewing rope and steel clips. With the wire ropes and steel clips, the tecc mesh is fastened onto the mountain or slope surface tightly and firmly to block the large stones and reduce the damage of landslip or debris flow.
Material: high tensible carbon steel
Wire strength: 1770Mpa
Wire diameter: 2mm, 3mm or 4mm
Roll width:1m - 3.5m
Roll length:10m - 30m
Hole size: G80, G65, G45 or G40
steel wire diameter; 2.2mm-3mm
tensile stregth; 1770MPA
mesh opening; 20MM- 40MM
roll width; 1-4m, length; 6m
feature; By wire rope bolt and/or support rope fixed way, the latter through the steel anchor (prestressing) and cable anchor rod (rope when used with edge support), special anchor plate and when necessary, such as the edge of support fixed way
advantage; 1.High flexibility, high protection strength, easy to spread out. To adapt to any slope topography, installation procedures standardized and systematized.
2.Using die cutting system installation, short time limit, low construction cost.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}