Material: Carbon steel, stainless steel.
Pitch: 2cm-6cm, net thickness 1cm-2.5cm, thickness 1mm-3mm.
Features: Large mud claw shells hexagonal mesh, significantly enhanced the anchorage capacity and lining materials. Effectively enhance the performance of lining materials, the link itself, can easily control the heat insulationTermostable Hexteel/Hexmesh Panel
The hexagon big putty fingernail hexsteel, strengthened obviously with lining material anchor ability. Thus strengthened lining material own linked performance effectively, definitely may control the phenomenon which the heat-resisting heat insulating layer easy sand buckle and falls off, enhances the lining material union fastness. Besides Excellent flexibility, high strength and erosion resistant.
Application:
Tortoise Shell Mesh has gotten extensive application in chemical industry, petroleum, power generation, etc. It appears good performance, it is a hexagonal hole mesh, with bar steel pressed and punched, three are small holes in every border for interflowing between the holes. The mesh is welded on cyclone dust collector or on the inside wall of the cylinder, poured refractory material. So, it has prolonged lifetime. The refractory material does not fall off to blockading the discharge hole.
Layer from the skin and the shedding phenomenon, to improve the combination of lining material fastness.
Application: Widely used for large-scale petrochemical plant, especially for one of the main components of catalyst equipment, which can improve the wear resistance and lining strength. General site with steel (A3F) shells mesh, such as the reactor and secondary cyclone, U-tube regenerator flue, etc., high temperature alloy parts (1Cr13) shells mesh, such as the regenerator and a second Stage Cyclone and other places.
| ITEM |
SPEC |
B |
A |
A/F |
ITEM |
SPEC |
B |
A |
A/F |
| 1 |
1.2 x 10 x 40mm |
1.2mm |
10mm |
40mm |
8 |
1.8 x 20 x 50mm |
1.8mm |
20mm |
50mm |
| 2 |
1.2 x 15 x 50mm |
1.2mm |
15mm |
50mm |
9 |
1.8 x 25 x 50mm |
1.8mm |
25mm |
50mm |
| 3 |
1.2 x 20 x 50mm |
1.2mm |
20mm |
50mm |
10 |
2.0 x 15 x 50mm |
2.0mm |
15mm |
50mm |
| 4 |
1.5 x 10 x 50mm |
1.5mm |
10mm |
50mm |
11 |
2.0 x 20 x 50mm |
2.0mm |
20mm |
50mm |
| 5 |
1.5 x 15 x 50mm |
1.5mm |
15mm |
50mm |
12 |
2.0 x 25 x 50mm |
2.0mm |
25mm |
50mm |
| 6 |
1.5 x 20 x 50mm |
1.5mm |
20mm |
50mm |
13 |
2.0 x 30 x 50mm |
2.0mm |
30mm |
50mm |
| 7 |
1.8 x 15 x 50mm |
1.8mm |
15mm |
50mm |
14 |
2.0 x 30 x 80mm |
2.0mm |
30mm |
80mm |
| Remark |
A/F |
min:40mm max:100mm |
| MATERIAL: |
A3,0Cr13,1Cr13,SS304,SS316,1Cr18Ni9Ti,SS310S |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}